Cloud chasing mechanical mod Number 25 by TS Mod. 100% brass, 100% made in Italy
Warning: Last items in stock!
Mechanical mod cloud chasing "NUMBER 25" by TS Mod
100% Brass (high conductivity) without any pin, internal operations by neodymium magnets.
The retail version (shown in the photos) is inclusive of the sleeve (cosmetic cover) 100% carbon. Other types of sleeves are sold separately
Total length = 79,5mm
Total weight (without battery) = 132 g
base diameter = 25mm
Diameter side attack atomizer = 25mm
PRODUCT 100% MADE IN ITALY
on finishing characteristics:
- Polishing by hand piece by piece
- Plating internal contacts in silver 999
- Washed / degreased manually piece by piece to remove any residual processing
NOTE: Use of this device is recommended for advanced users on the product type. Use only brand batteries (high quality), with high amperage discharge, Sony VTC-4, Sony VTC-5, VTC-5A and without pin (FLAT type). The battery in a mechanical constitutes the heart of the same, for this reason it is important both in quality and to secure chemical.
Be careful that the atomizer has entered the central part of the PIN (positive) with a sufficient range as compared to the outside of the thread 510 (negative), otherwise the battery is short (the central part of the PIN must be longer than the outside outside with the thread).
And 'advisable not go down too with the value in ohms of resistance. Install the battery with the positive pin facing upwards (side atomizer). The mechanic was also tested with the reversed battery and works the same, in any case it is advisable to stay the positive pin upwards because in case of short and possible consequent emission of gas (batteries to secure chemical) this will be ejected from the positive , where the holes of the safety vent have been made.
Always test before the atomizer resistance to be mounted on a meter or on an electronic device
The manufacturer assumes no liability resulting from improper use of this equipment
The user is encouraged to read the operating instructions supplied with each device.
WE ARE NOT RESPONSIBLE FOR ANY INCORRECT OR IMPROPER USE OF THIS DEVICE
KEEP OUT OF REACH OF CHILDREN
Dispose of in an environmentally friendly, using special containers for hazardous waste.